14
BRAZEN 3000 SETUP - CONTINUED
7. Attach the blowpipe to the handle
using the spanner supplied, do not
over tighten
8. Screw the required tip onto
the blowpipe. Using the spanner
supplied, do not over tighten
9. Attach the hose to the handle
with the numbers facing up, orange
hose on the left, tighten anti-clockwise
and blue hose on the right tighten
clockwise using the spanner supplied,
do not over tighten
10. Attach the hose to the fuel and
oxygen regulators
• Orange hose connected to the fuel
regulator tighten anti-clockwise using
the spanner supplied, do not over
tighten
• Blue hose to the Oxygen regulator
tighten clockwise using the spanner
supplied, do not over tighten
TIP SIZE ORIFICE WELDING RANGE
0#
0.7mm
0.5mm - 1mm
1#
0.8mm
1mm - 2mm
2#
0.9mm
2mm - 3mm
3#
1.0mm
3mm - 4mm
