4
BOSSWELD GAS WELDING EQUIPMENT
Dear customer,
Thank you for your purchase of our BOSSWELD BRAZEN 3000 portable
brazing & heating kit. The BOSSWELD range of gas welding and cutting
equipment has been rigorously tested by independent laboratories and
conforms to the following Australian Standards for gas welding and cutting
processes:
Small heating and brazing kits currently are not covered under the scope of
an existing Australian standard
(DEC 2018
), however the Brazen 3000 kit meets
the requirements of the European Standard.
EN 1326 - 1996
Gas welding equipment
- small Kits for brazing and welding
BOSSWELD strives to meet all relevant Australian Standards. Should there
be change to existing or creation of new Australian Standards, BOSSWELD
will endeavor to ensure that all products and services comply with those
standards.
This manual refers to safety measures that must be adhered to for the safe
operation of your BOSSWELD BRAZEN 3000 equipment. Please read and
understand these warnings and instructions before use. Failure to do so
could result in serious injury or death. BOSSWELD brazing and heating
equipment should only be used by operators who are properly trained and
qualified in the safe use of this type of equipment.
