9
SAFETY
SAFETY
TIP REPLACEMENT
Make sure you use the tool supplied and that tips are installed straight as not to
wear the thread, this can result in a leak.
• Ensure tip has cooled after use before replacing.
• Do not over tighten
• Ensure tip is clean and dry before installing and is not blocked.
CYLINDER REPLACEMENT
• Make sure the regulator is completely shut off before removing it from the
cylinder., Always check condition of the seal in the regulator before replacing
on a new cylinder
• Unscrew the empty cylinder and replace with a new one.
• Dispose of empty cylinder at your local recycling center
- NEVER incinerate empty cylinder.
- Do NOT puncture.
