WASP™ NEST4 Smart Receiver and Gateway Operations Manual
- 22 -
3.2.7.6 Setting Velocity Warning and Critical Alarm Thresholds
To set the desired velocity warning and critical alarm
thresholds for each individual sensor, select the
desired option from the SENSOR SETTINGS screen,
HI VEL
/
HI-HI VEL
/
LO VEL
/
LO-LO VEL
The bottom left quadrant of the screen will display the
current setting (in mm/s) or DISABLED if there is no
current threshold setting. Select or modify the desired
maximum warning or maximum critical value by
tapping the
UP / DOWN
and
LEFT / RIGHT
arrows.
Once the desired value has been selected press
OK
to save or
CANCEL
the editing and return
to the SENSOR SETTINGS screen.
3.2.7.7 Setting Sensor Lost Warning
A warning can be issued to alert that a sensor has not
reported to the NEST Receiver for a pre-determined
timeframe.
To set the amount of elapsed time a sensor can go
without reporting, scroll down to, and highlight the
LOST WARN
parameter, and tap
SELECT
to access
the LOST SENSOR WARNING screen.
The bottom left quadrant of the screen will display the
current setting (in minutes) or 0000 if no setting. Tap
the
UP / DOWN
and
LEFT / RIGHT
arrows to set the
desired value and
OK
to save. Press
CANCEL
to
cancel the editing and return to the SENSOR
SETTINGS screen.
