WASP™ NEST4 Smart Receiver and Gateway Operations Manual
- 17 -
To bind a sensor, scroll up/down and highlight a
sensor from the FREE sensor list. Once found, tap
SELECT
to move to BIND/IGNORE screen.
BIND
will add this sensor to this receiver’s database.
IGNORE
will ignore the sensor allowing another
receiver to pick up that sensor. This is useful in large
installations where you may have overlap between
the effective range of sensors and receivers.
After BIND action is selected, you need to select an
input to attach the sensor to. Attaching to an input
allows the information to be pulled for that individual
sensor via MODBUS. The SELECT INPUT screen
will highlight the next “available” input and will also
show the current bound sensor inputs. Choose
SELECT
to attach to next available input or scroll to
desired input and SELECT.
The NEST Receiver will request confirmation to bind
the sensor to the selected input, tap
YES
or
NO
.
The receiver will jump back to the FREE list screen
after the confirmation allowing this process to be
repeated.
Repeat this process until all the sensors you would
like to bind are bound to the receiver.
If you happen to bind a sensor that you should not have - go to
SENSOR LISTS
. Then choose
BOUND
and scroll to find the sensor that should not have been bound. Select the sensor - then
choose to
IGNORE
or
REMOVE
.
IGNORE
places the sensor on the ignored list - it can be bound at a later time.
REMOVE
- removes the sensor entirely from the system (until the next packet of information is
received) allowing another sensor to take its place. There is a functional limit to the number of
sensors that can be bound to the system. If the number of sensors in the area is greater than the
functional limit, then the remove feature should be used to give the wanted sensor a chance to
get on the list.
BIND
IGNORE
SENSOR LIST> FREE
21'C CRI=4 WRN=1 13:46 NOV 24/10
MAIN
MENU
SELECT
BIND
1: 1360
2: 1370
3: AVAILABLE
4: AVAILABLE
5: AVAILABLE
6: AVAILABLE
SELECT INPUT
21'C CRI=4 WRN=1 13:46 NOV 24/10
BACK
SELECT
3: AVAILABLE
BIND 1366 TO INPUT 3
YES TO BIND
NO TO CANCEL
BIND SENSOR
21'C CRI=4 WRN=1 13:46 NOV 24/10
NO
YES
