WASP™ NEST4 Smart Receiver and Gateway Operations Manual
- 8 -
3.1 System Status Screens
When activating the BossPac WASP™ system for the first time the BossPac NEST receiver will
automatically detect all sensor pucks within the working radius (assuming battery modules are
attached to the sensors).
The default screen, when turning on the BossPac
NEST™ receiver or waking the screen from sleep
mode, is the SYSTEM STATUS screen. The
SYSTEM STATUS screen displays the number of
sensors attached to the system as well as any
current critical or warning alarm. The screen will
also cycle through the critical screen and warning
screen when the top half of the screen is tapped.
The max values displayed are the current max
values of the entire sensor array.
Tapping on the
SENSOR STATUS
square will take
you to the sensor status grid screen. Further
tapping on a sensor square,
EXHA 01
for example,
will take you to a status screen for that individual
sensor. Tapping on
NEXT
will cycle through
available status grid pages, (all other sensors).
Each individual sensor status screen will display the
name of the sensor along with the current status.
Tapping on the bottom half of the screen will cycle
the screen through more status data and settings of
the sensor. Tapping on the top half of the screen
will cycle the screen through the available sensors.
(For example: Tap on right side of the top section
cycles to next listed sensor
EXHA 02
. Tap on left
side of the top section cycles to previous listed
sensor
INTK 10
). To configure a sensor, or modify
the settings, tap on the
SETUP
section.
Instructions on configuring individual sensors are covered under Section 3.2.9
Note: if no limits have been set, zeros will be displayed beside the parameter.
SYSTEM STATUS
21'C CRI=4 WRN=1 13:46 NOV 24/10
SENSORS:24
CRIT:4, WARN:1
MAX TEMP:+26 C
MAX ACCEL: 1.4 G
MAX VEL: 0.5 MM/S
MAIN
MENU
SENSOR
STATUS
SENSOR STATUS> PAGE 2 OF 2
21'C CRI=4 WRN=1 13:46 NOV 24/10
INTK 07
NORM
INTK 08
NORM
INTK 09
NORM
SYSTEM
STATUS
NEXT
INTK 10
NORM
EXHA 01
WARN
EXHA 02
NORM
EXHA 01
WARN: 2.33 G
TEMP: 80 C
ACCEL: 2.33 G
VEL: 5 MM/S
SENSOR STATUS
21'C CRI=4 WRN=1 13:46 NOV 24/10
BACK
SETUP
