WASP™ NEST4 Smart Receiver and Gateway Operations Manual
- 18 -
3.2.4.3 Adding the NEST To an Existing Network
To add the NEST to an existing network. Start the
Network ADD process on the NEST that has the
network that you would like to add this NEST to.
> MAIN MENU > NETWORK > JOIN NETWORK
Enter the 6-digit numeric pass phrase used on the
existing network NEST and press
START
.
3.2.4.4 Removing the NEST From the Network
If you wish to remove the NEST from the Network, select:
> MAIN MENU > NETWORK > CLEAR NETWORK
The previous network connection information will be removed from the NEST and all SENSOR
LISTs will be cleared.
The NEST will automatically create a new network that devices can be connected to. If you
wish to have any devices previously connected to the NEST on the new network, they will need
to be added by following the procedure in
Attaching a Device to The System
.
3.2.5 Alarm Overide
The ALARM OVERIDE is used to ignore an alarm
during the startup process of the machinery. During
startup, or restart procedure, some machinery may run
rougher than normal. The override provides a waiting
period, (usually about 5 minutes), to allow the
machinery to get into sync, or natural rhythm, prior to
sending out warnings or alarms.
3.2.6 Diagnostic
The DIAGNOSTIC info and sensor log are both set to “Disable” as a default.
