symptom
Counter measures
Tool will not cycle, the indicator
LED is green and the fan runs.
by removing the cap.
center near you.
Tool operate normally, but no
nail is driven
change to correct nail spec.
before use.
with the nail strip. Adjust to fully engage-
ment.
Combustion chamber is not
returning to start position.
dirty.
Check the work contact element and repair
orreplace it. Clean the safety track.
Driver did not return to initial position, miss
Tool appears to be loosing
power.
For failure other than above situation, please stop using the tool and contact your local
dealer for service.
