Load and unload the fuel cell
Open the fuel cell door by pulling the
door and rotate.
Insert the fuel cell into the chamber.
Align the fuel cell nozzle to the fuel stem
on the tool.
Close the fuel cell door.
Load and unload the fastener
Connect to battery and fuel cell before
you load the fasteners. The tool had the
chance to cycle once when connected to
the battery. If you load the fastener
before the battery connected, the
fastener may be shoot out accidentally.
Point the nozzle away from any
trigger when loading the fastener.
To load the nail, slide in the nail strip
into the magazine until the nail strip passed the nail stopper.
Pull the pusher until it is beyond the stopper.
Release the pusher to engage the nail strip and feed it into the nozzle.
To unload the fastener from the magazine, press the release lever on the
pusher and tilt the tool to slide the nail strip to the rear end of the
magazine.
Unload the nail strip by press the nail stopper and slide out the nail strip.
For 3 steps magazine design, follow the same safety precaution
and continue with following steps
To load nail, pull the pusher to the rear until it is locked to the magazine at
rear position.
Slide nail strip into the magazine.
Release the pusher to push the nail into the nozzle.
To unload the fastener from the tool, pull the
pusher to the rear locking position. Slide the
nail out of the magazine.
2. Operation instruction
