Light Indicator Descriptions
•
RUN
(Green Light)
o
Flashing: Works
properly
o
Often
off
: System exception
•
ALM
(Red Light)
o
Often
off
: Works
properly
o
Always bright
: System alarms
Note:
If the system alarm is enabled and want to eliminate it, you will need to reboot.
Main Interface Description
•
Operating
Status:
Display controller is currently running.
o
Emergency Stop:
F
ollow the process
;
s
ystem. If there are alarms into
the
emergency stop State. Troubleshooting completed by compound key,
the
system enters the waiting
s
tate
o
Wait
bit
:
The system is powered on, first began entering the wait after
the
completion of State
o
Perforation:
When a piercing signal (BH)
a
fter closure, the system
reached the hole position.
o
Follow
-bit
:
Follow signals (TR) after closure, the system reached the
following locations.
•
Follow the h
eight
:
Show follow height
o
The distance between the floating head and the plate
•
Signal Strength:
Displays the current capacitance of signal value.
o
The closer the nozzle is, the smaller the capacitance
•
CA/TR/UL/LL:
Displays the current input signal status.
o
When an input signal is switched, the signal back on the LCD will display
" * ". The input signal is disconnected when a " * " disappears.
Setting Interface
Press the "set" key to go to the "
settings
" as shown in the following picture:
FTC61 SERIES MANUAL
Document Number: 855-910
Revision: 001 Revision Date: 6/1/2019
BOSSLASER - PAGE 3 of 12
