background image

12

Main Specifications

BOSS WAZA Tube Amp Expander (WAZA-TAE): Tube Amp Expander

Maximum Input Power

FROM TUBE AMP: 150 W

Safety Load (power off)

FROM TUBE AMP: 16 Ω

Rated Power Output

TO SPEAKER: 100 W (8 Ω)

Load Impedance

TO SPEAKER: 4–16 Ω

Input Impedance

FROM TUBE AMP: 4/8/16 Ω (selectable)
FX LOOP RETURN: 1 MΩ

Output Impedance

LINE OUT L/R: 600 Ω
LINE OUT MONO (FOH): 600 Ω
FX LOOP SEND: 1 kΩ

Nominal Output Level

LINE OUT L/R: +4 dBu
LINE OUT MONO (FOH): +4 dBu

FX LOOP Nominal 
Output Level

-10/+4 dBu (selectable)

Maximum Output Level

LINE OUT L/R: +20 dBu
LINE OUT MONO (FOH): +20 dBu
FX LOOP SEND: +6 dBu (-10) /+20 dBu (+4)

Controls

POWER switch
SPEAKER OUT knob
LINE OUT knob
PHONES knob
RESONANCE-Z knob
PRESENCE-Z knob
RIG knob
REVERB knob
FX LOOP button
EFFECTS button
SOLO/EQ button
AMP CTL button
SPEAKER IMPEDANCE switch
INPUT LEVEL switch
L/R GND LIFT switch
MONO (FOH) GND LIFT switch
LOOP switch
LEVEL switch
SEND GND LIFT switch
RETURN GND LIFT switch
AMP CTL switch

Indicators

POWER
WRITE
FX LOOP
EFFECTS
SOLO/EQ
AMP CTL
INPUT SIG/PEAK

Connectors

FROM TUBE AMP jack: 1/4-inch phone type
SPEAKER OUT jacks (OUT A, OUT B): 1/4-inch phone type
LINE OUT L/R connectors: XLR type
LINE OUT MONO (FOH) connector: XLR type
PHONES jack: Stereo 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
FX LOOP jack: 1/4-inch phone type
GA-FC jack: 1/4-inch TRS phone type
AMP CTL jack: 1/4-inch phone type
USB COMPUTER port: USB B type
MIDI (IN, THRU/OUT) connectors
AC IN jack

Power Consumption

100 W

Dimensions 
(including foots)

380 (W) x 296 (D) x 110 (H) mm
15 (W) x 11-11/16 (D) x 4-3/8 (H) inches

Weight

6.8 kg
15 lbs

Accessories

Owner’s manual
Power cord
Rack mount angle x 2 (for EIA-2U)
GA-FC sticker

Options 
(sold separately)

Footswitch: BOSS FS-5L
Expression pedal: Roland EV-5, BOSS FV-500H, BOSS 
FV-500L, BOSS EV-30
GA Foot Controller: BOSS GA-FC

*  0 dBu = 0.775 Vrms
*  This document explains the specifications of the product at the 

time that the document was issued. For the latest information, refer 

to the Roland website.

Summary of Contents for WAZA















Reviews: