Continued
4.
Installing the Drain Outlet Clamp Assembly
Select a location for the drain clamp
above
the ‘S’ Trap but not more than 40mm above
the normal water level or the best location is on the transfer pipe between twin bowl sinks
if you have one. Position the drain outlet clamp on the drain pipe. Allow adequate space
for drilling. Tighten Clamp with “Tightening Screw”
Using the opening in the drain outlet clamp, drill a
¼
” hole in the drain pipe. Clean debris
from the clamp. Reattach tube Connector.
NOTE: Locate the drain connection away from the garbage disposal to prevent
potential contamination and system fouling.
Important: Use Cold Water Only!
Page 6
