background image

 

This unit is fitted with a re-mineralizing cartridge, it weight when new is 1200 grams and when 
exhausted will weigh around 300 grams. If you detect a change in the taste of the water remove 
this cartridge and weigh it, it is also a good idea when changing the sediment and carbon 
cartridges to weigh it then. The life of this cartridge is determined by the PH level of the water 
exiting the membrane and will vary from location to location. 

 
 

1.  BOSS Water Systems Australia (“The Warrantor”) makes no claims or offers no 

warranties other that those detailed herein.  The benefits of this warranty are in addition 
to all other rights and remedies covering the product line under the Trade Practices Act 
(CTH) 1974 

2.  This warranty is available only to original purchasers of new packaged water purifies 

carrying our Boss Water Systems Australia brand name.  It does not extend to the resale 
of second-hand or demonstration models, or to alternative brand or unbranded goods, or 
to any replacement parts, cartridges, or components, manufactured by and/or sold by 
BOSS Water Systems Australia. 

3.  This warrantee applies for a period of 12 months from the date of purchase of our 

product, from an authorised dealer, against defect in material of workmanship. 

4.  The following damages and defects are excluded from this warrantee to the extent that 

they are the result of acts of the purchaser, or persons other than the warrantor.  

5.  Repairs or modifications attempted by personnel not authorised by the warrantor. 
6.  Damage or impaired performance resulting from misuse, abuse, breakage or neglect 
7.  This warrantee does not cover,  

Disposable in-line filters or any cartridges 
Loss, expense or damage caused by use on water supplies in excess of 40 degrees C 
Loss, expense or damage caused by freezing. 
Loss, expense or damage caused by failure to use a suitable pressure limiting/anti-
hammer device. 
Pressure limiting valves, connection systems, transformers and ballasts are 12 months 
warranty. 
 

BOSS Water Systems Australia   
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Page 11 

Summary of Contents for Genesis Cafe












Reviews: