background image

41

Patterns and Songs

Chap. 1

Pad bank

The instruments (drum sounds) of a kit are organized into three groups with twenty instruments in 
each group.
These groups are called “pad banks.”

fig.01-040

Press [PAD] to select among the DRUM 1–3 pad 
banks; the currently selected pad bank is shown 
in the screen.
You can press a key pad to play the instrument 
that’s assigned to that pad.

Hold down [SHIFT] and press [PAD] to switch 
to the bass pads. When you strike a key pad, the 
bass tone will sound at the pitch (note name) 
printed at the upper right of the key pad you 
struck.
By holding down [SHIFT] and pressing [PAD] to 
select “BASS -1” you can play the sounds one 
octave lower. By selecting “BASS +1” you can 
play the sounds one octave higher.

Kit

16

11

6

1

17

12

7

2

18

13

8

3

19

14

9

4

20

15

10

5

DRUM 1

16

11

6

1

17

12

7

2

18

13

8

3

19

14

9

4

20

15

10

5

DRUM 2

16

11

6

1

17

12

7

2

18

13

8

3

19

14

9

4

20

15

10

5

DRUM 3

BASS

BASS +1

BASS -1

1
2

U001

20

20

1
2

20

1
2

DRUM 1

DRUM 2

DRUM 3

BASS

Insert Effect

• KICK
• SNARE

• OTHERS
• BASS

About the maximum polyphony

The DR-880 has a maximum polyphony of 
32 notes (voices). Some bass sounds use 
two voices when you play one note, and if 
you’re using this type of bass sound, the 
maximum polyphony will be less than 32 
notes.
For details on the number of voices used by 
each instrument, refer to p. 153.

Summary of Contents for Dr. Rhythm DR-880









































































































































































Reviews: