33
BoSS X-Series
User guide
We continually improve our machines based on customer feedback,
regulatory requirements, changes in standards and technological
innovation.
Machines with earlier serial numbers
than those detailed here differ from
the machines covered earlier in this
user guide.
These earlier machines differ as follows:
(Please refer to the machine serial numbers below)
Storage for the charging cables and guardrail tools is in the form of
a small drawer under the step up to the platform.
The main frame of the entry gate to the platform is wider. The
width has been reduced on later models to avoid trapping of hands
in the hinge of the gate as it closes.
The Emergency Lowering procedure operated differently on earlier
models as follows:
STEP 1
Turn the finger screw on the
valve on the hydraulic cylinder
anticlockwise until it will not turn
any further as shown in Figure 1
to the right.
STEP 2
Turn the finger screw on the power
pack emergency descent valve
anticlockwise until it will not turn
any further, as shown in Figure 2
to the right. The platform will now
lower safely.
WARNINGS
ALWAYS
ensure that someone at ground level i.e. other than the
operator, is trained to perform this rescue.
NEVER
undertake STEP 2 before STEP 1.
Section 8 - Variations on earlier
BoSS X-Series machines
BoSS X3X – YMG 32001
BoSS X3 – YMG 12001
BoSS X2 – YMG 22001
Figure 1
Figure 2
BoSS_XSeries_Userguide_Rev C 0519_English.indd 33
08/05/2019 12:21
