12
bosspoweredaccess.com
BoSS X-Series
User guide
Section 3 - Safety rules
These safety rules should be adhered to in every way.
NEVER
exceed the 240kg Safe Working Load of the platform.
NEVER
use the BoSS X-Series machine as a crane.
NEVER
attempt to increase the reach or working height of the BoSS
X-Series machine by use of additional equipment eg. ladders.
NEVER
use the BoSS X-Series machine in temperatures exceeding 45ºC or
below -15ºC.
NEVER
manoeuvre the BoSS X-Series machine on an inclined surface
otherwise it may become uncontrollable.
NEVER
release the brakes or manoeuvre the BoSS X-Series machine whilst
in an elevated position, as this may cause instability.
NEVER
manoeuvre the BoSS X-Series machine with a person or materials
on the platform.
NEVER
attempt to get on or off the work platform of the BoSS X-Series
machine when elevated.
NEVER
apply external side loads to the platform or scissor structure.
NEVER
allow persons at ground level to operate the controls whilst the
platform is occupied (unless in an emergency situation).
NEVER
operate the BoSS X-Series machine outdoors.
NEVER
use the BoSS X-Series machine as a jack, prop or tie to support
other structures or machines etc.
NEVER
interfere with, wedge or attempt to override hydraulic, electrical or
mechanical safety devices.
NEVER
open the drawer in the chassis. The drawer must only be opened by
an authorised, trained and competent maintenance engineer.
NEVER
allow works overhead of the BoSS X-Series machine to be carried
out which are outside the control of the operator.
NEVER
use the BoSS X-Series machine as an electrical earth when welding
structures alongside it.
NEVER
use the guardrails to carry materials.
NEVER
attempt to overreach.
NEVER
stand in front of, or behind the BoSS X-Series machine whilst it is
being winched.
BoSS_XSeries_Userguide_Rev C 0519_English.indd 12
08/05/2019 12:20
