9
Looper
When you press the [DELAY] pedal and the [TUNER & MUTE] pedal simultaneously, the looper
starts.
When the looper starts, you can use the [TUNER & MUTE] pedal to record your guitar and create
a loop performance.
Loop Playback Level Setting
If you set the playback level at 50 (default value), the volume of
the performance and that of the loop playback will be identical.
If you set the playback level to a value lower than 50, the
volume of the playback will be lower than that of the
performance. As a result, the sound of the performance won’t
get buried by the loop playback sound, even if you record a
multiple number of times.
For details on the settings, refer to “Output Setting” (p. 10).
[LOOP] Pedal Color
[LOOP] Pedal
Color
Display indication Status
Red
RC
Recording
Green
PL
Playback
Orange
DB
Overdub
Green (blink)
ST
Stopped (phrase exists)
Red (blink)
CL
Stopped (no phrase)
Recording
Recording will start immediately
when you press the [TUNER &
MUTE] pedal.
At the point where you want to
loop, press the pedal to switch to
playback.
Loop Playback
Play back the loop.
Pressing the [TUNER & MUTE]
pedal will switch to overdubbing.
Overdub
Record additional layers while
playing back the loop.
Press the [TUNER & MUTE] pedal to
switch to playback.
Stop/Clear
To stop, press the [TUNER & MUTE] pedal
twice.
To clear the phrase, hold down the [LOOP]
pedal for at least two seconds while
stopped.
Press Twice
