12
Advanced Settings
Assigning the Functions of the Pedals
You can specify the function of each of the AD-10’s pedals, and
of a footswitch or expression pedal connected to the CTL1, 2/
EXP jack.
“Connecting a Footswitch or an Expression Pedal” (p. 3)
1
Hold down the [EXIT] button and press the [BOOST]
pedal.
The [MEMORY] button is lit red, and the [BOOST] pedal is lit
purple.
2
Press the [MEMORY] button to select the parameter
that you want to edit.
3
Use the [
?
] [
=
] buttons to select a value.
4
Press the [EXIT] button to exit setting mode.
Parameter
Value Explanation
EF
(Exp Function)
ov
OUTPUT LEVEL
AN
AMBIENCE LEVEL
LP
LOOP LEVEL
1F
(CTL1 Function),
2F
(CTL2 Function),
BF
(BOOST Pdl Function),
dF
(DELAY Pdl Function),
tF
(TUNER & MUTE Pdl
Function)
NN
MEMORY/MANUAL
Tv
TUNER & MUTE ON/OFF
TA
TUNER & MUTE ON/OFF
(HOLD:ANTI-FB SCAN)
AT
ANTI-FB SCAN
(HOLD:TUNER&MUTE ON/
OFF)
FX
FX ON/OFF
TT
TapTempo
in
InSelect
LP
LOOP REC/PLAY/DUB
(PRESS TWICE: STOP, HOLD:
CLEAR)
LS
LOOP STOP
(HOLD: CLEAR)
LC
LOOP CLEAR
AS
ANTI-FB SCAN
(HOLD: CLEAR)
Ni
MEMORY
=
(CTL1: default)
Nd
MEMORY
?
(CTL2: default)
Other Functions
1
Hold down the [EXIT] button and press the [DELAY]
pedal.
The [MEMORY] button is lit red, and the [DELAY] pedal is lit
purple.
2
Press the [MEMORY] button to select a parameter
(refer to table).
MEMO
To return to the previous parameter, hold down the [EXIT]
button and press the [MEMORY] button.
3
Use the [
?
] [
=
] buttons to select a value.
4
Press the [EXIT] button to exit settings mode.
Parameter
Value
Explanation
USB monitor setting
vd
(USB direct
out)
Switches the output of the AD-10 sound to the
XLR and LINE jacks.
* You must install the USB driver when
connecting the AD-10 to your computer.
Download the USB driver from the BOSS
website. For details, refer to Readme.htm
which is included in the download.
&
https://www boss info/support/
of
The sound of the AD-10 is not
output from the XLR and LINE jacks;
it is output only to the computer
(USB).
Use this when you want to use your
DAW to apply a plug-in effect to the
sound of the AD-10, and output the
result from the output jacks.
on
The sound of the AD-10 is output to
the XLR and LINE jacks (default).
vi
(USB INPUT
LEVEL)
0
–
55
–
gg
Input level of USB AUDIO
vo
(USB
OUTPUT LEVEL)
0
–
55
–
gg
Output level of USB AUDIO
Auto Off Setting
Ao
(Auto Off)
With the factory settings, the AD-10 will
automatically be switched off 10 hours after you
stop playing or operating the unit.
* If you don’t want the unit to turn off
automatically, change this setting to “
oF
”
(OFF).
of
The power will not turn off
automatically.
on
The power will automatically turn off
after 10 hours. (default)
STARTUP MODE
SN
(STARTUP
MODE)
Selects the mode at power-on.
1
MANUAL MODE (default)
2
MEMORY MODE
3
MEMORY STOMP MODE
Memory settings for each effect
For each effect, you can specify whether its settings are
switched according to the selected MEMORY, or always use
settings that correspond to the position of its knobs (MANUAL).
For example, you can specify that the input/output settings and
EQ always use the same settings, but delay and ambience will
be switched as you select a different memory.
