Boss Snowplow MSC13960, Owner'S Manual

Page: 8 / 16

2. Disconnect the angle-cylinder hydraulic hoses
from the quick disconnect and attach them to
each other (
Figure 13 ).
g037043
Figure 13
1. Plow hoses 3. Quick disconnects
2. Coupler pin
3. Pull the coupler pin to release the couplers
(
Figure 13 ).
4. Start the machine and raise the plow until the
kickstand can be lowered all the way.
5. Lower the kickstand; refer to Kickstand (page 7) .
6. Lower the A-frame until the couplers disconnect.
7. Slowly back away from the plow.
Operating Tips
•
Become familiar with the area you are plowing;
hidden obstructions such as curbs and pipes can
damage your plow or machine.
•
Do not let snow accumulate; always plow with the
storm.
•
Lower the plow when not in use to prevent possible
injury.
•
Always plow at a safe speed in case you hit hidden
obstructions.
•
When transporting the machine, do not block your
vision with the plow.
•
Do not change the plow position while plowing.
•
Ensure that the kickstand is raised before plowing
to prevent damage to the plow or machine.
•
For more plowing tips, visit www.bossplow.com .
8