background image

BOSS Products

Commercial Warranty

What this warranty covers:

This warranty covers defects in material and workmanship except as set forth below.

Who is covered:

The original purchaser from an authorized dealer.

For how long:
Complete Product:

2 years from the date of purchase.

Labor:

2 years from the date of purchase for complete product.

Parts:

1 year from the date of purchase. (no Labor)

What BOSS Products will do:

BOSS Products will, at its sole option, repair or replace defective parts at no charge.

What you must do for warranty service:

To obtain warranty service, purchaser must return the defective product to any authorized BOSS Products dealer (preferably the one from whom the

product was purchased) within the warranty period. Purchaser must be able to verify the original purchase date. All transportation costs to and from the
dealer will be the responsibility of the purchaser. To locate the authorized BOSS dealer nearest to you, call toll free: (800) 286-4155.

What is not covered:

1.

Expendable parts such as hoses, plow shoes, cutting edges, pins, nuts, bolts, blade guides, etc.

2.

Products repaired or altered by anyone other than an authorized BOSS Products dealer.

3.

Products which have been subject to misuse, negligence, accident, improper installation, maintenance, care, or storage.

4.

Products mounted on vehicles other than those listed in the

BOSS Snowplow Application Chart and Selection Guide

.

5.

BOSS Products does not assume liability for damage to your motor vehicle resulting from the attachment or use of any BOSS products. Vehicle risk
is the sole responsibility of the purchaser.

Limits of BOSS Products Liability are:
BOSS Products’ liability is expressly limited to repair or replacement of defective parts. BOSS Products shall not be liable for consequential,
incidental, or contingent damages whatsoever, even if damages are caused by the negligence or fault of BOSS Products. The foregoing
warranties are exclusive and in lieu of all other express and implied warranties including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.

This warranty does not apply if you purchased your product for personal, family, or household use. In this case, refer to the BOSS Products Limited
Consumer Warranty.

BOSS Products is a division of
The Toro® Company
P.O.Box 787 2010 The BOSS Way
Iron Mountain, MI 49801

Rev A

 

Summary of Contents for MSC13960

















Reviews: