•
To make the scoop shape with the plow, press
the Left Wing Out and Right Wing Out buttons
simultaneously until the blades are fully extended.
•
To make the “V” shape with the plow, press the Left
Wing In and Right Wing In buttons simultaneously
until the blades are fully retracted.
Specifications
Note:
Specifications and design are subject to
change without notice.
Blade width
198 cm (6 ft 6 inch)
Blade height
77 cm (30-1/2
inches)
Weight
181 kg (400 lbs)
Attachments/Accessories
A selection of BOSS approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized BOSS
distributor or go to
www.BOSSPlow.com
for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine BOSS
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Mounting the Snowplow
Note:
The vehicle must be running before starting
this procedure.
1.
Activate the F
LOAT
feature on your plow
controller.
2.
Line up the vehicle with the snowplow and drive
forward until the lower pin contacts the pin
receiver.
g321674
Figure 21
1.
Coupler tower
3.
Wire harness
2.
Lower pin
4.
Pin receiver
3.
Set the parking brake.
Note:
If your vehicle does not have a parking
brake, chock the wheels.
4.
Turn the levers on the couplers to the A
TTACH
position.
15
