E - 25
Bluetooth Operations
Handsfree Operation
When connecting Bluetooth devices at the first
time with this unit, a mutual registration is
required, this is called “Pairing”. This
registration (Pairing) is required only at the first
time, as this unit and the other devices will
recognize each other automatically from the
next time.
After the devices are registered (Paired) with
this unit. User can select the registered device
and connect it, this is called “Connecting”.
TIPS
This unit can Pair up to 8 devices with
Handsfree and / or Audio Devices.
If the pairing Bluetooth device has both
HFP (Handsfree Profile) and A2DP
(Advance Audio Distribution Profile).
This unit will automatically pairing these
two profiles at the same time.
Pairing, Connecting And Deleting
With A Bluetooth Device
Searching available Bluetooth
Devices for Pairing “from this unit”.
1. Access into the SETUP MENU, and touch
to activate the Pairing procedure.
2. Tap
to activate the searching
pairing device mode.
NOTE
Please see SETUP MENU Operation for
more details of how to access into
Bluetooth Menu – Pairing mode.
NOTE
Please make sure to check the pairing
Bluetooth device, make sure the
Bluetooth mode is turned ON and the
“VISIBILITY” is set to “SHOW”.
Stored image may differ from the original
aspect ratio due to compression or
elongation.
3. When searching is completed, the detected
device name(s) will be displayed in a list.
4. Tap the device name you want to be
connected/paired with the selected device
in the list.
5. Password input: user can input minimum 1 &
up to maximum 4 of any numeric number
between 0 to 9, as the password for this unit.
6. Tap
button on display to confirm
the password input, and the Pairing process
should start.
7. “BT70” should appear on the pairing device,
user should select & accept pair with
“BT70” and then input the same password
which was input on this unit previously
on above step 6.
8. If the pairing is successful, the below display
will be show on TFT:
If the pairing failed, the below display will be
show on TFT for 3 seconds:
and the unit will automatically switch back to
the previous mode.
NOTE
Please refer to the instruction manual of the
Bluetooth device on how to enter into the
Bluetooth set up and Bluetooth pairing.
NOTE
During Pairing, only the Volume & Mute
buttons are functional, all the other
function keys are disabled & non-operational
during the pairing mode.
Summary of Contents for BV9350
Page 1: ...4 10 R 02 1011...
