DVD Operations
- 9
E 1
5
FUNCTION MENU
Tap
button access into the Function
Menu, and there are have below options for
selection:
Repeat “CH”
the chapter.
to repeat playback the
current
During playback to change the audio
language (DVD/Divx only).
Top
button access into the
Video Setting mode, the below Setup menu
will appear:
Repeat “Title”
the
current title.
to repeat playback
Repeat “ Off ” to cancel all the Repeat
function.
Repeat
Disc Audio
Video Setting
Change the Bright
level from 01 to 10.
Change the Contrast
level from 01 to 10.
Change the Color
level from 01 to 10.
Reset to default
setting
Close the Setting
menu
Under the DVD Setup mode, there are have
below options for selection:
Setting the Default on will reset all options of
Media function setting to factory defaults
setting.
DVD Setup
Default
Aspect Ratio:
Selecting the TV Aspect
setting allows the user to select the aspect
ratio of the TV (DVD and VCD only). The
following options are available:
TV Signal:
The Video setting allows the
user to select the TV standard (DVD and
VCD only). The following options are
available:
4:3 = Aspect ratio of TV is 4:3.
16:9=Aspect ratio of TV is 16:9. Both wide
screen and 4:3 contents will fill the
entire screen.
NTSC = TV is NTSC. PAL content is played at
NTSC resolution and frame rate
(factory default).
PAL = TV is PAL. NTSC content is played at
PAL resolution and rame rate.
AUTO = If the content is PAL, the output is PAL.
If the content is NTSC, the output is
NTSC.
6
INFORMATION
Tap
button to view the Disc information
of the unit.
7
VIDEO SETUP
Tap
button to quickly enter into the
video setup mode.
Summary of Contents for BV9350
Page 1: ...4 10 R 02 1011...
