background image

BV7350T User’s Manual - page

 

9

To avoid damage, please follow these 

precautions:

 - Do not subject it to excessive shock.
 - Do not carry in a pocket.
 - Do not leave in direct sunlight.

Battery replacement

The remote control uses a lithium button 

type battery, model CR 2025 3V. Do not 
use any other kind of battery in the remote. 
Follow these instructions when installing or 
replace the battery.

1.  Remove the battery holder by pressing 

the locking tab with your thumb, and slide 
the battery holder out.

2.  Replace the battery with the same type 

of battery with the (+) side facing up.

3.  Gently push in the holder until it is se-

curely locked in place.

General Operation

Initial system start-up

Be sure to press the 

RESET

 button (25) 

when using the unit for the fi rst time, after 
all connections are completed correctly. 

1. Turn off the unit power.

2. Press the 

RESET

 button.

 * The 

RESET

 button on the housing must 

be activated with either a ballpoint pen or 
similar pointed object. The 

RESET

 button 

is to be activated for the following reasons:

 - Initial installation of the unit when all wir-

ing is completed.

 - Some the function buttons do not operate.
 - Error symbol appears on the display.

Turning power on and off

Turn on the unit by pressing   button or 

inserting a disc in the 

DISC SLOT

 (22).

When system is on, press and hold the   to 

turn off the unit.

Warning LED

The LED (24) will fl ash if the front cover is 

not properly inserted into the main unit.

ESP function

The unit features an anti-shock feature, 

which buffers a certain amount of the re-
corded program into memory so that if the 
unit skips due to rough road conditions, the 
music or video will be uninterrupted. The 
time of the buffered content varies depend-
ing on the disc type:

     CD,VCD:18 seconds
     MP3:160 seconds
     DVD: 6 seconds
     MPEG4: 20 seconds

Mute function

To turn off the sound instantly, press the 

MUTE

 button. To return it to the prior sound 

level, press 

MUTE

 again.

Mode function

Press 

MODE

 repeatedly to switch between 

DVD, TV, AV and TUNER modes. 

Summary of Contents for BV7350T

































Reviews: