System Setup
Owner’s Guide - 9
Using a Speaker Stand
The bottom of the S1 Pro system includes a pole cup for mounting the loudspeaker on a speaker
stand. The pole cup fits a standard 35 mm post. When the S1 Pro is placed on a speaker stand, the EQ
automatically updates to maintain optimum tonal balance.
Set Channel 3 Controls
Channel 3 is for use with
Bluetooth
®-capable devices and line-level audio inputs.
Bluetooth
Pairing
1. On your device, turn on the
Bluetooth
feature.
Note:
The Bluetooth feature is usually in the Settings menu.
2. Press and hold the
button for two seconds. Select your Bose® S1 Pro from the device list. While the
device is pairing, the
flashes white. When the device pairs successfully, the will turn solid white.
Note:
If pairing is unsuccessful, repeat steps 1 and 2 until the devices are synced.
3. Press play and turn up the
Volume
on the S1 Pro until indicator light is green, or the desired volume
level is reached. If the volume indicator steadily glows red, decrease the volume.
Bluetooth
Behaviors
• The most recently paired
Bluetooth
device will automatically sync when the S1 Pro is turned on.
• The S1 Pro can only be paired with one device at a time; to pair to a new device, repeat "
Bluetooth
Pairing".
• If your paired phone receives a call, any music playing will be paused and the ring will come through
the phone; no calls or notifications will come through the S1 Pro.
AUX Input
1. Connect a 3.5 mm (⅛") cable to a line-level sound source. Make sure that the volume is turned up on
the sound source.
Note:
Anything connected via the AUX input will automatically override any device paired via Bluetooth
connectivity.
2. Turn up the
Volume
on the S1 Pro until the indicator light is green, or the desired volume level is
reached. If the volume indicator steadily glows red, decrease the volume.
WARNING:
Do NOT use the Bose S1 Pro system with a tripod/stand that is unstable. The
loudspeaker is only designed for use on a 35 mm post, and the tripod/stand must be capable of
supporting a speaker with a minimum weight of 7 kg (15 lbs) and an overall size of 241 x 279 x 330
mm (9.5 x 11 x 13 inches). Using a tripod/stand that is not designed to support the size and mass
of the S1 Pro system may lead to an unstable and hazardous condition that could result in injury.
