8 - Owner’s Guide
System Setup
Connect Sources
Before plugging in a sound source, adjust all channel
Volume
controls fully counterclockwise.
Set Channel 1 & 2 Controls
Channel 1 and 2 are for use with dynamic microphones, guitars, keyboards or other instruments.
1. Before connecting your microphone or instrument, adjust the
Volume
control for the appropriate
channel fully counterclockwise.
2. Channels 1 and 2 are equipped with an integrated ToneMatch® preset to automatically optimize the
sound of your microphone or instrument. If desired, apply the ToneMatch preset by moving the
ToneMatch switch for the appropriate channel to for microphones or for other instruments.
3. While speaking into the microphone or playing your instrument, adjust the volume to the desired level
by slowly turning the
Volume
control clockwise.
4. Adjust the
Treble
,
Bass
, and
Reverb
controls to make further refinements based on your personal
preference. While speaking into the microphone or playing your instrument, slowly adjust the control
until desired effect is achieved.
Connect Power
1. Make sure the power switch is in
Standby
( ).
2. Plug one end of the power cord into the connector on the S1 Pro.
3. Plug the other end of the power cord into a live electrical outlet.
4. Connect sound sources before turning the system on. See “Connect Sources” below.
5. Once the sound sources are connected, turn the system on by moving the power switch to
On
( ).
Note:
The
Quick Charge
(
)
power setting is for use with the battery accessory only. For more
information, see the battery accessory owner’s guide, available at
www.Bose.com
.
SIG
NA
L
1
2
3
SIG
NA
L
SIG
NA
L
POWE
R
1
SIG
NA
L
1
2
3
SIG
NA
L
SIG
NA
L
POWE
R
2
3
