10
[email protected]
www.boschert.de
Mattenstraße 1
79541 Lörrach-Hauingen
Tel.: +49 (0) 7621 - 95 93 0
Fax: +49 (0) 7621 - 55 18 4
Changes reserved
Version: 01/ 2004
Safety
emergency stop
main switch
2.13
Fire Extinguishers
Be aware of the location and operation of fire extinguishers.
2.12
Emergencies
The machine has been adjusted to give its full cutting performance.
In an emergency the machine can be immediately cut off from electrical current by pressing
the red emergency stop switch or by turning the main switch to 0.
The machine is equipped with hydraulic overload protection. If a sheet that is beyond the
capacity of the machine is inadvertently loaded into the machine, the ram will stop mid-stroke
(without damage to the machine.)
To reverse the ram, press the PROG button until the LED under SET UP is lit. Press the UP
arrow key to move the ram out of the cut stroke.
Continuous Single Set-up
Up On-Off
Selection mode
key Down Air On-Off
(not applicable for
90 degree fixed
angle notcher)
