Operating the appliance
en
35
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
Start/Reload
A
button.
2.
Select another programme.
3.
And touch the
Start/Reload
A
button again. The new programme
starts from the beginning.
Cancel the programme
For programmes at high temperatures:
1.
Touch the
Start/Reload
A
button.
2.
To cool down laundry: Select
à
Rinse
.
3.
And touch the
Start/Reload
A
button again.
For programmes at low temperatures:
1.
Touch the
Start/Reload
A
button.
2.
Select
0
[
Spin/Drain
.
3.
And touch the
Start/Reload
A
button again.
Programme end
End
lights up on the display panel and
~
and
Õ
displays are off.
If you have selected
2
, the water is only
drained after rinse process, no spin
cycle.
Removing laundry/switching
off the appliance
1.
Set programme selector to
Off
.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
Summary of Contents for WGA244U0AU
Page 51: ...6 ...
