en
Positioning and connecting
20
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Note:
Use a screwdriver if
necessary.
2.
Insert all four sleeves.
a) Clip the mains cable securely in
the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the
holders.
Before switching on the appliance
again:
Notes
■
The support struts
must
be
removed.
■
The transport braces
must
be
removed.
"Removing the transport locks"
■
Pour approx. 1 litre of water into
dispenser II, select the
[
Drain
programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.
Summary of Contents for WGA244U0AU
Page 51: ...6 ...