Bosch WGA244U0AU Instruction Manual And Installation Instructions Download

Page: 14 / 52

Positioning and connecting

Installing the appliance in a

kitchenette

Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

Do not remove the appliance covering

plate.

Notes

■

Recess width of 60 cm required.

■

Only install the appliance

underneath a continuous worktop

that is securely connected to

adjacent cabinets.

Removing the transport locks

Caution!

Damage to the appliance

■

The appliance is secured for

transportation using transport locks.

If the transport locks are not

removed, the appliance may

become damaged when it is

operated.

Before using the appliance for the

first time, make sure that you

completely remove all four transport

locks. Keep the locks in a safe

place.

■

To prevent transport damage from

occurring if the appliance is moved

at a later date, you must refit the

transport locks before transporting

the appliance.

Note:

Keep the screws and sleeves in

a safe place.

Take the hoses out of the holders.

Unscrew and remove all four

transport brace screws.

a) Remove the mains cable from the

holders.

b) Remove the sleeves.

Summary of Contents for WGA244U0AU





















































Search results

Summary of Contents for WGA244U0AU

Reviews:

Related manuals for WGA244U0AU

Brands by name

Popular brands

Bosch WGA244U0AU, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WGA244U0AU

Reviews:

Related manuals for WGA244U0AU

Brands by name

Popular brands