If the
AQUA
STOP
®
has operated, error messages are generated
(
"Aqua-stop activated"
for washers with large digital displays and
“E:17”
for washers with lights and small digital displays) and a beeper
will sound.
The
AQUA
STOP
®
system operates when the washer is turned on and
the door is closed. It doesn’t operate when the washer is turned off or
has been unplugged.
Water is removed manually, using towels or a wet-vac. Tilt the
washer slightly forward to make sure all water has been removed,
especially from under the float. The float switch resets automatically
once all water has been removed.
AQUA
STOP
®
(float switch) can’t be retrofitted to washers it wasn’t
installed in originally.
4.2.15 AQUASTOP
®
(aqua secure) inlet hoses (selected models)
Hot and cold water
AQUA
STOP
®
inlet hoses eliminate leaking. The
AQUA
STOP
®
hose consists of an inner hose (~ inlet water tubing)
and an outer hose (corrugated, ~ to drain hoses). If the inner hose
leaks, a small indicator window will show
red
, meaning the hose must
be replaced (hoses cannot be reused once a leak occurs).
Indicator
window
QUA
STOP
®
hoses can be used with any washer (or misting dryer)
A
with standard US threads (3/4” NH, 11.5 threads/inch). They protect
homes and provide peace of mind for people on vacation and those
asleep, busy or who don’t shut off water valves when washers (and
misting dryers) aren’t in use.
702_58300000143607_ara_en_a
Page 17 of 42
