4.2.6 Shock absorber (damper)
Along with the top and front counterweights, two 90 N shocks (one /
side) dampen washer vibrations, especially during spinning. Shocks
have a maximum travel of 95mm (3-3/4“).
Most shocks returned for analysis (from washer vibration) haven’t
failed. A rule of thumb is if the shock has resistance when pulled, it
hasn’t failed. Most vibration has been due to sub floors inadequate for
modern high-speed appliances or washers not properly leveled (see
section 5.3).
Occasionally grease may leak out of a
washer shock absorber (damper). This is
normal and doesn’t affect shock
performance.
4.2.7 Rear shock absorber (damper)
Unlike WFMC washers with a rear spring, WFVC washers use a rear
shock, using the same shock as the side shocks.
702_58300000143607_ara_en_a
Page 13 of 42
