Bosch WFL 2060UC, Training Program

Page: 28 / 84

Disassembly
Disassembly
--
--
Drum (1), Top Panel
Drum (1), Top Panel
28
To access the drum, the front panel must be removed first.
2
2
1
2
2
TO REMOVE FRONT PANEL (to access drum):
• c
Remove top panel.
• d
To remove fascia panel, first remove T-10 Torx screw on
right endcap and T-20 Torx screws on either side of fascia
panel. Remove dispenser drawer (after pushing
blue tab) and
then remove (3) screws located behind dispenser drawer.
Gently pull the bottom of the fascia panel away from the washer.
• e
Remove base panel (“toe kick”) by opening & removing drain
trap door, unscrewing one T-20 Torx screw and gently pulling
the bottom of the base panel away from the washer.
12
3
HINT:
Dispenser
screws are
recessed -- use a
screwdriver, not
a socket set.
HINT:
When accessing door seal, door
seal spring or door latch, it’s not necessary
to remove the fascia panel. Remove only
the bottom right corner dispenser screw.
1st Edition/Revision 5 (1/20/04)