background image

Cleaning and maintenance       

en

57

– Protect the rear drawer connector 

against water, detergent or fabric-

softener residue; if necessary, 

clean the outer surfaces with a 

soft, damp cloth. Dry before 

putting back in.

e) Clean the drawer and the cover 

with a soft, damp cloth or a hand 

shower. Also clean the inner 

surfaces with a soft, damp cloth.

f) Dry the drawer and the cover and 

put them back together.

g) Push the drawer handle back in 

from above until you feel it click 

in place.

h) Clean the inside of the detergent-

drawer housing.

i) Push the detergent drawer in 

completely.

The drain pump is blocked, 

emergency draining

:

Warning

Risk of scalding!

When you wash at high temperatures, 

the water gets very hot. If you come into 

contact with the hot water, you may be 

scalded. 

Allow the water to cool down.

1.

Turn off the water tap so that no 

more water can flow in and has to be 

drained via the drain pump.

2.

Switch off the appliance. Pull out the 

mains plug.

3.

Open and remove the service flap. 

4.

Take the drain hose out of the 

retainer.

Remove the sealing cap and pour 

the water out into a suitable 

container.

Replace the sealing cap and place 

the drain hose back in the retainer.

5.

Carefully unscrew the pump cover; 

residual water may leak out.

Clean the interior, pump-cover 

thread and pump housing. The 

impeller in the drain pump must be 

able to rotate.

Refit the pump cover and screw it on 

tightly. The handle must be in a 

vertical position.

Summary of Contents for WAWH26S9SN





































































Reviews: