background image

en

    Intelligent dosing system

46

My water hardness:

Below is an example of detergent 

dosages on a packaging label:

The default setting for the basic dosage 

is set specifically according to the area 

in which you live (e.g. 75 ml for 

detergent and 36 ml for fabric softener). 
Set the basic detergent dosage 

according to the detergent's packaging 

label. Take your water hardness into 

consideration when doing so.
Select the basic fabric softener dosage 

according to how soft you would like 

your laundry to be. 
Changing one basic dosage affects all 

three dosage quantities in the same 

way.

Notes

Reduce the basic dosage if using a 

very concentrated detergent.

If large amounts of foam are 

repeatedly created during washing, 

please check your basic dosage and 

dosage quantity settings.

Certain types of liquid detergent can 

also create excessive amounts of 

foam. If your basic dosage and 

dosage quantity settings are correct, 

we advise you to use a different 

detergent.

Changing the basic dosages:

1.

Press the corresponding i-DOS 

button (

w

 or 

i

) for approx. 3 

seconds. The preset basic dosage 

will appear in the display panel.

2.

Set the required basic dosage using 

the 

Ready in -

 or 

+

 buttons.

3.

The setting is activated without 

needing to be confirmed. You can 

now wait for a short while or press 

any button (except the i-DOS 

buttons) to revert to the original 

setting.

Note:  

The settings are saved until 

they are changed again, even if the 

machine is switched off.

Degree of 

soiling 

Water 

hardness 

light

normal

heavy

very heavy

soft/medium

55 ml

75 ml

120 

ml

160 

ml

hard/very hard 75 ml

95 ml

150 

ml

180 

ml

Summary of Contents for WAWH26S9SN





































































Reviews: