Faults and what to do about them.
en
63
The display panel/indica-
tor lights do not work
while the appliance is run-
ning.
■
Has there been a power failure?
■
Have the fuses blown/has the circuit breaker tripped? Switch on the circuit
breaker/replace the fuses.
■
If the fault occurs repeatedly, call the after-sales service.
There is detergent resi-
due on the laundry.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select
'
Rinse
or brush the laundry after washing.
- P -
appears on the dis-
play panel when the cycle
is paused.
■
The water level is too high. It is not possible to add laundry. Close the door
immediately, if necessary.
■
Press the
A
button to resume the programme.
- P -
and
ÿ
appear on
the display panel when
the cycle is paused.
The door is unlocked. It is possible to add laundry.
If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is re-
quired:
■
Switch off the appliance and pull the mains plug out of the socket.
■
Turn off the tap and call the after-sales service.
Faults
Cause/remedy
