Maintenance
Updates
Firmware updates are carried out via our Video Client software or other management systems
in use. Please refer to the relevant documentation.
Factory reset
You can use the factory reset button to restore the unit to its original settings. Any changes to
the settings are overwritten by the factory defaults. A reset may be necessary, for example, if
the unit has invalid settings that prevent it from functioning as desired.
1.
Using a pointed object, press the factory reset button located on the rear panel until the
CONNECT LED flashes red. All settings will revert to their defaults.
2.
The unit is ready for use as soon as the CONNECT LED lights up green.
P
The unit can now only be addressed via the factory default IP 192.168.0.1: reconfigure it
to your needs.
Repairs
–
Never open the housing of the unit. The unit does not contain any user-serviceable parts.
–
Never open the housing of the power supply unit. The power supply unit does not contain
any user-serviceable parts.
–
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists). In case of doubt, contact your
dealer's technical service center.
8
8.1
8.2
8.3
VIDEOJET decoder 3000
Maintenance | en
27
Bosch Sicherheitssysteme GmbH
Installation Manual
2013.08 | V3 | F.01U.281.923
Summary of Contents for VJD-3000
Page 1: ...VIDEOJET decoder 3000 VJD 3000 en Installation Manual ...
Page 2: ......
Page 32: ......
Page 33: ......
