Bosch vivatmo pro Instructions For Use Manual Download Page 86

Page: 86 / 87

Instructions for use

Appendix

English

WARNING

Note that portable and mobile HF communication systems may interfere with this device. Do not staple

or use the device close to mobile phones or other devices generating electrical or electromagnetic

fields. This could result in malfunction of the medical device and may create a potentially insecure situ-

ation. Portable RF communication devices (including peripherals such as antenna cables and external

antennas) are not to be used closer than 30 cm next to any part of the

Vivatmo pro

system.

The

Vivatmo pro

is intended for use in professional healthcare facility environment. The customer or the user of

Vivatmo pro

should assure that it is used in such an environment.

Medical devices may be affected by cellular telephones and other personal or household devices not intended for medical

facilities. It is recommended that all equipment used near the

Vivatmo pro

device comply with the medical electromagnetic

compatibility standard and to check before use that no interference is evident or possible. If interference is suspected or

possible, switching off the offending device is the normal solution, as is required in aircraft and medical facilities. Medical

electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to the

EMC information provided.

11.2 Compliant cables

WARNING

The use of accessories, transducers and cables other than those specified may result in increased

emissions or decreased immunity performance of the equipment or system.

Summary of Contents for vivatmo pro
























































































Search results

Summary of Contents for vivatmo pro

Reviews:

Bosch vivatmo pro, Instructions For Use Manual, Page: 86 / 87

Search results

Summary of Contents for vivatmo pro

Reviews: