Bosch vivatmo pro Instructions For Use Manual Download Page 20

Page: 20 / 87

Instructions for use

Installation

English

Installation

Before you start using your

Vivatmo pro

perform the following steps:

• Install the handheld.

• Install the basestation.

3.1 Installing the handheld

To install the handheld, insert the rechargeable battery.

1. Open the battery compartment on the back of the

Vivatmo pro

handheld.

2. Hold the handling tab with two fingers and insert the rechargeable battery

into the battery compartment. Mind the triangle marks on the battery and

inside the battery compartment.

3. Apply the battery cover.
4. Remove protective cap and place the handheld on the basestation cradle

for charging. Charge before first use. The recharging time for a

completely exhausted battery is about 12 hours. As long as the LED is

blinking blue, the handheld is charging.

5. Press the

ON/OFF

button to turn on the handheld. You see all screen

icons and the system performs a brief self-test. Then the software version

on the handheld is shown.

6. Turn off the device before you replace the battery.

Summary of Contents for vivatmo pro
























































































Search results

Summary of Contents for vivatmo pro

Reviews:

Bosch vivatmo pro, Instructions For Use Manual, Page: 20 / 87

Search results

Summary of Contents for vivatmo pro

Reviews: