manualshive.com logo in svg

Bosch vivatmo pro, Instructions For Use Manual, Page: 32 / 87

Share
Download
Bosch vivatmo pro Instructions For Use Manual Download Page 32

© Bosch Healthcare Solutions GmbH

30

Instructions for use

Measure

English

English

English

English

English

English

English

4.2  Measurement stand-alone with the handheld

Stand-alone measurements can be used when the handheld has no connection to the basestation. 

The handheld must be out of range of the basestation or the basestation must be switched off.
The measurement procedure is guided by the handheld display and the LED on the upper side. Synchronize measurement  

results of stand-alone measurements with the 

Vivatmo pro

 handheld by placing the switched on 

Vivatmo pro

 handheld in the 

cradle of the 

Vivatmo pro

 basestation. 

1.  Use the 

ON/OFF

 button to activate your 

Vivatmo pro 

handheld.

You see all screen icons and the system performs a brief self-test. Then the 

software version installed on the handheld is shown shortly.
After the self-test, the handheld shows:
•  the 

audio

 icon on the handheld is activated,

•  the bluetooth connection is not activated. The 

Bluetooth

 icon is blinking, as 

the handheld is not connected to the basestation.

2.  Attach a new disposable mouthpiece.

3.  The handheld device might be busy. Wait until the 

clock

 icon stops blinking. 

Press the 

ENTER

 button to start the regeneration cycle.

While the handheld is regenerating, segments of the display will be animated to 

indicate the handheld is preparing the measurement.

Summary of Contents for vivatmo pro
























































































Reviews:

No comments