Bosch VG5 600 Series, User Manual

Page: 43 / 68

PTZ Setup Menu Choices:
Menu Description Sub-menu / Description Default
Setting
Exit Exits the menu.
�
Edit Tour 1 Accesses the Add /
Remove Scenes On
Standard Tour 1 Menu. Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Standard Tour.
Edit Tour 2 Accesses the Edit Custom
Tour Menu. Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Custom Tour.
Tour 1 Period Changes the length of
waiting time between
presets. Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Tour 2 Period Changes the length of
waiting time between
presets. Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Scan Speed Changes the Autopan and
AutoScan speeds. Sliding scale: – (1°/sec to 60°/sec)
+ 30°/
sec.
Edit Presets Modifies preset scenes. 1-99 scenes
Limit Stops Toggles the Limit Stops for
AutoScan. ON or OFF OFF
Recordings Selects record Pattern 1 or
2, if normal pattern
command does not
respond. “A” or “B” “A”
AutoPivot Follows a subject while
beneath the camera,
without inverting the
picture. ON or OFF ON
Other Menus
Menu Description Default
Setting
Edit Password Sets or displays the password. See Section 1.4 Setting
Passwords, page 8.
FastAddress (locked) Sets or changes the AutoDome address. Not Set
Software Version
(unlocked) Displays the camera software version.
Ack and Reset Alarms Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
“No Active Alarms.”
5.1.4
AutoDome 600 Series Analog PTZ
Camera
Pelco On-Screen Menus | en 43
Bosch Security Systems, Inc. User Manual 2014.11 | 2.1 | F.01U.270.005