Bosch VG5 600 Series, User Manual

Page: 21 / 68

Menu Description Sub-menu / Description Default Setting
Alarm Relay A fixed output available
for use in a rule.
Outputs 5-12 Defines a command
output for use in a rule. Aux On: A keyboard ON command.
Aux Off: A keyboard OFF command.
Shot: Recalls a preset shot.
OSD: An on screen display.
Transmit: Transmits a message back to the head
end (available with RS-232 serial connections,
Bilinx, and IP AutoDome models).
AutoTrack: Turns AutoTrack on or off as an output.
NONE: No command defined. NONE
Outputs 5 and 6
set to OSD and
Shot 1
Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
existing rule. The default setting is Empty.
Notice!
You can program a total of twelve rules. You must define the inputs and outputs before you
program a rule. See Alarm I/O Setup, page 18, to configure alarm inputs and outputs.
Rule Setup... Rule 1
Exit... Exit...
1. Rule 1 Enabled Enabled YES
2. Rule 2 Disable
d Input:
3. Rule 3 Invalid NONE
4. Rule 4 Empty NONE
5. Rule 5 Empty NONE
6. Rule 6 Empty
7. Rule 7 Empty Output:
8. Rule 8 Empty OSD
9. Rule 9 Empty Shot 2
10. Rule 10 Empty Alarm Relay 2 sec
11. Rule 11 Empty NONE
12. Rule 12 Empty
4. Rule 4 Empty
2.8
AutoDome 600 Series Analog PTZ
Camera
On-Screen Display Menu Navigation | en 21
Bosch Security Systems, Inc. User Manual 2014.11 | 2.1 | F.01U.270.005