Bosch UPH-2D Series Instruction Manual Download Page 54

Page: 54 / 64

en | Configuring the System

High Speed Pan/Tilt System

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

Auto Exposure Parameters Menu

The

Auto Exposure Parameters

menu is used to control the iris of the UPH-Z Series. In Auto-

matic mode the iris of the camera/lens combination automatically reacts to light level

changes. In

Manual

mode the user has full control of the iris.

Parameters Mode - Infrared Menu

The

Parameters Mode - Infrared Menu

controls how the IR-cut filter of the camera/lens com-

bination reacts to light changes.

Dynamic Masking (UPH-Z Series only)

With dynamic masking, it is possible to create up to 24 masks so as to hide specific areas

defined by the user. The masks are defined in the space and take into account the horizontal,

vertical, and depth position of the zoom at the time of the setting.

The UPH automatically holds the position and the size of the masking, according to the area

displayed.

AE PARAMETERS

1 -

MODE:

AUTOMATIC

Fig. 11.23

AE Parameters Menu

Feature

Description

Default

Options

MODE

Type of exposure control

AUTOMATIC

PARAMETERS MODE - INFRARED

1 - INFRARED MODE ENABLING

2 - AUTOM. INFRARED MODE

YES

3 - INFRARED DELAY TIME

025

4 - ICR OFF AE LEVEL

Fig. 11.24

Parameters Mode Menu

Feature

Description

Default

Options

INFRARED MODE
ENABLING

Continuous activation of infrared
mode.

YES, NO

AUTOM. INFRARED
MODE

Enables the automatic function
with automatic switching to infra-
red mode.

YES YES,

INFRARED DELAY TIME Delayed recognition of daylight

(color) mode; the parameter is
shown in seconds.

005 - 255

ICR OFF AE LEVEL

Changes the point of switching the
IR-cut filter (ICR) between day and
night time. The lower the value,

the earlier the ICR changes (i.e.
more sensitive to low light).

1, 10, 16, 18,
20, 22, 24, 26

Summary of Contents for UPH-2D Series

































































Search results

Summary of Contents for UPH-2D Series

Reviews:

Related manuals for UPH-2D Series

Brands by name

Popular brands

Bosch UPH-2D Series, Instruction Manual

Search results

Summary of Contents for UPH-2D Series

Reviews:

Related manuals for UPH-2D Series

Brands by name

Popular brands