High Speed Pan/Tilt System
Configuring the System | en
39
Bosch Security Systems
Instruction Manual
F01U.073.990 | Version 1.0 | 2007.07
The character being edited flashes and the joystick (up and down) can be used to change it.
After making the change, confirm and continue to edit the text, or else exit with the
Iris
but-
ton.
Fig. 11.6
Edit Text Menu
Offset Pan
By default, the offset pan is +0.00. The value can be changed to move the default pan position
of the unit to wherever is convenient. For example, if the installation requires that the NORTH
position should be at 0.00 ° (pan), then an offset pan can be entered to compensate for any
deviation from NORTH. After mounting, the NORTH position was found to be +41.37 ° (pan
position); therefore, the offset pan should be set to - 41.37 ° to make the pan +0.00 ° position
point to NORTH.
This has an effect on the Area Titles as defined in the
Area Position
menu. In the above exam-
ple, after the offset pan has been set to -41.37 °, the Area Text Menu "1 - Area" could be
changed to "1 - NORTH" to display NORTH on the screen at pan +0.00 ° position.
11.2.3
Display Parameters
The
Display Parameters
menu is used to enter the settings menus for the device movement
parameters.
EDIT TEXT MENU
v _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
1ABC
2DEF
3GHI
4JKL
5MNO
6PQR
7STU 8VWX
9YZ
0()x
+,-.
DISPLAY PARAMETERS
1 - OSD VIDEO ENABLING
: YES
2 - VIDEO CHARACTER TYPE : 000
3 - HORIZONTAL DELTA
: 000
4 - VERTICAL DELTA
: 000
5 - ADDRSS NUMBER
YES
Fig. 11.7
Display Parameters Menu
OSD Video Enabling
Set to
YES
to superimpose the menu text over the video signal
from the camera. Set to
NO
to have a blue screen behind the
menu TEXT.
Video Character Type
Set to 0 to make the background of the text to transparent; set to
1 to make it black.
Horizontal Delta/Vertical
Delta
These set the position of reference to the titler so that the text
can be centralized.
Address Number
If enabled, the address number of the unit is shown at the top left
of the screen during normal operation.
