High Performance LCD Monitors
Installing the Monitor | en
15
Bosch Security Systems, Inc.
User’s Manual
F.01U.075.713 | 1.0 | 2008.03
6.2.2
Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt mount.
Figure 6.1
Mounting the Device
6.3
Connecting the Composite Video Signal to the Monitor
There are two (2) BNC connectors located on the rear side panel of the monitor for composite
video input and two (2) BNC connectors for composite video outputs (see
Figure 3.3
).
Note
: All video inputs are passive loop-through. The impedance is automatically set to 75 ohm
by the input of the signal on the input connector, while operating in a single connection mode
(see
Figure 6.6
). If a cable is also connected to the output connector, the video signal can be
passed on to another monitor connected to it via the passive loop-through function. Up to
three (3) monitors may be connected in this manner (see
Figure 6.7
).
Note:
To select between AV1 and AV2, press Input (see
Figure 3.1
, Item 1 or
Figure 3.2
, Item
1) located on the front of the monitor.
6.4
Connecting the Y/C (S-Video) Signal to the Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see
Figure 6.2
) on the
rear side panel.
Note
: Both Y and C inputs are terminated with 75 ohm.
Figure 6.2
Y/C Connection Pinout
Number Input
1
GND
2
GND
3
Y-signal IN or OUT
4
C-signal IN or OUT
Summary of Contents for UML-172-90
Page 1: ...High Performance LCD Monitors UML 172 90 UML 192 90 UML 202 90 en User s Manual ...
Page 2: ......
Page 35: ......
