Bosch UML-172-90, User Manual

Page: 23 / 36

High Performance LCD Monitors Navigating the Monitor | en 19
Bosch Security Systems, Inc. User’s Manual F.01U.075.713 | 1.0 | 2008.03
4. Press the Menu button to activate the main menu selections (see Figure 3.1 or
Figure 3.2 ).
5. Press the
S
and
T
buttons to select a menu.
6. Press the Input button to enter the selected menu.
7. Press the
W
and
X
buttons to select a sub-menu item.
8. Press the
S
and
T
buttons to toggle the OSD values.
9. Press the Menu button to exit the selected menu and to return to the menu bar or to
confirm a selection.
10. Press the Menu button again to exit the OSD menu bar.
7.3 On-screen Display Menus
There are four (4) on-screen menus that allow you to customize your settings. Press the Menu
button to access the OSD menu.
7.4 Custom Menu
To access the Custom menu, press the Menu button on the front panel of the monitor. Next,
press the right arrow and then press the up and down arrows to select a submenu. Press the
left and right arrow buttons to increase or decrease the values. When finished, press the
Menu button to save any changes, then press the Menu button again to exit the OSD.
Table 7.1 Custom Menu (Video Mode)
Icon Menu Function
Custom Adjusts the Brightness, Contrast, Color, Tint, and the Sharpness
level for video performance of the OSD. (The menu options differ
between the Video and PC modes.)
Picture / Sound Adjusts the Picture Mode, Color Tone, Mute, Volume, Size, and the
PC settings. (The menu options differ between the Video and PC
modes.)
PIP Adjusts the Input Source, Size, Position, Swap, and the Sound
Select settings.
Set Up Enables user to Reset the factory default settings and to adjust the
Language, OSD Tone, Blue Screen, and the Key Lock settings.
Custom
Brightness 50
Contrast 50
Color 50
Tint 50
Sharpness 20
:Move
:Input :Menu