Camera/Lens installation
Camera tray mount
1.
Loosen the two screws holding the camera tray in the housing. Slide the tray backwards
and remove from the housing.
2.
Attach the lens to the camera. (If the lens length can vary, make sure that it is fully
extended.)
3.
Use the 1/4-20 x 3/8 in. screw, the flat washer and the steel camera clamp to secure the
camera to the camera tray.
1/4-20 x 3/8 in.
Low profile cameras
For low profile camera/lens assemblies use different combinations of the 9 mm and the 4 mm
plastic spacers to ensure that the camera lens is in the center of the window.
With the spacers, use the 1/4-20 x 3/4 in. screw, the spring washer, and plastic clamp (or
second spacer) as necessary to attach the camera/lens to the camera tray.
9 mm
1/4-20 x 3/4 in.
4 mm
5.5
5.5.1
14
en | Installation
UHO Camera Housing
2014.10 | 5.0 | F.01U.167.418
Installation Manual
Bosch Security Systems
Summary of Contents for UHO-HBGS
Page 1: ...UHO Camera Housing UHO HBPS UHO HBGS UHO HGS UHO HPS en Installation Manual ...
Page 2: ......
Page 23: ......
