Housing mounting
1.
Use two 1/4-20 x 0.50 in. screws and two 1/4 in. spring washers to mount the housing to
a mount or a pan/tilt. The spring washers must be used for a secure connection.
2.
The outermost set of 1/4-20 threaded holes (2) are for mounting to feed-through mounts,
and the innermost 1/4-20 threaded holes (1) are for mounting to all other mounts and
pan/tilts.
Opening the cover
!
Caution!
The heater will be hot when in operation.
Do not touch! Always ensure that the heater is off and cool before working on the camera.
Open the cover by unlatching the three latches (1) on the side of the housing. If the optional
tamper-resistant screws have been installed, use the supplied wrench to remove the screws
before opening the latches.
5.2
5.3
12
en | Installation
UHO Camera Housing
2014.10 | 5.0 | F.01U.167.418
Installation Manual
Bosch Security Systems
Summary of Contents for UHO-HBGS
Page 1: ...UHO Camera Housing UHO HBPS UHO HBGS UHO HGS UHO HPS en Installation Manual ...
Page 2: ......
Page 23: ......
