Installing the storage tank
TSS – 6720887693 (2018/10)
16
The triangles above the elongated holes mark the position of the anti-slip
protectors.
▶ Push the anti-slip protector down over the profile rail and let it click
into the slot.
Fig. 32 Installing anti-slip brackets on the lower profile rails
[1]
Lower profile rail for two collectors
[2]
Lower profile rail for one collector
7
Installing the storage tank
WARNING:
Risk to life from falling parts!
The accumulation of snow above the storage tank generates
considerable forces.
▶ Install a snow guard above the storage tank (maintain a clearance of
no more than 1 m between the storage tank and the snow guard).
▶ Alternatively: regularly clear snow build-up.
▶ Place the storage tank strap into the recesses of the short profile rails
and tighten.
Fig. 33 Installing the storage tank strap
The storage tank is heavy and awkward to handle. Note the position of
the storage tank on the installation set before carrying it.
▶ Adhere the adhesive strips to the storage tank straps as tank
protection [1].
▶ Place the storage tank in the middle of the storage tank straps and
rotate it until the storage tank connections are vertical [2].
Fig. 34 Placing and aligning the storage tank in the storage tank straps
▶ Align the storage tank so that the drainage pipe [1] is not closed off
at the bottom by the storage tank strap.
Fig. 35 Do not block the drainage pipe
▶ Install a hexagon bolt M8 × 50 with a flat washer and aluminium nut
[2] on the storage tank [1].
▶ Slide the aluminium nut into the profile rail and tighten the
connection.
Fig. 36 Tightening the storage tank strap
0010014827-01
1
2
click!
1
1
2
2
0010015744-01
0010015744-01
M8x20
M8x20
0010015745-01
0010015745-01
2
1
1
0010016282-01
0010016090-01
2
1
Summary of Contents for TSS Series
Page 29: ......
Page 30: ......
Page 31: ......
Page 32: ...Bosch Thermotechnik GmbH Junkersstrasse 20 24 D 73249 Wernau www bosch thermotechnology com ...