Bosch TES502 series, Instruction Manual

Page: 9 / 132

5
en
“Drink selection” rotary knob
This rotary knob (14) is used
to select the required drink
and the per-cup quantity. It
is also used to change user
settings.
a
to
c
Small Espresso
Espresso
Small Café Crème
Café Crème
Large Café Crème
b
to
d
2 small Espresso
2 Espresso
2 small Café Crème
2 Café Crème
2 large Café Crème
e
Rinse machine
f
Rinse milk system
N.B.: If a drink is selected that cannot be
prepared,
Invalid combination
appears in
the display. Change the coffee strength or
the selected drink.
Milk frother
Pull the milk frother (6) out to open it and
push it back in to close it.
Controls
Power on/off switch O / I
The power switch O / I (9) is used to switch
the appliance on or to switch it off fully
(power supply off).
Important:
Before switching off, run the
cleaning programme or use the
e
off /
j
button (12) to switch off.
e
off /
j
button
When the
e
off /
j
button (12) is pressed
briefly, the appliance rinses and switches
off. Pressing and holding down the
e
off /
j
button (12) displays the user settings or
starts the descaling and cleaning function.
h
button
Press the
h
button (11) to generate steam
for preparing milk froth.
start button
Press the start button (10) to begin drink
preparation or to start a service programme.
Press the start button (10) again during
drink preparation to cut the dispensing
process short.
“Coffee strength” rotary knob
This rotary knob (13) is used
to set the coffee strength.
h
to
g
Very mild
Mild
Mild +
Normal
Strong